Slice Engineering

Pump more power into your 3D printer with a high power density 50W heater cartridge.  Available in 24V and 12V variations with different connector...

Thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, whi...

Copperhead™ Heat Breaks Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep Copperhead™ Hea...

Copperhead™ Heat Sink Aircraft-grade aluminum heat sink Fits the Standard Copperhead™ Heat Break Two variants available SEMI™ mount Groovemount F...

Replace your factory model hotend with the Copperhead™, to upgrade your 3D printer’s performance and reduce jamming, giving you a smooth print ever...

Liquid Mosquito 6mmOD cooling connections NOTE: These are 5-6 days delivery from the US if ordered with the Liquid Mosquito hotend complete. High-q...

1 m long extension cable Molex Micro-Fit 3.0 connector (female end) JST RE-02 connector (male end) 

Wet 3D printing filament can cause all sorts of issues. In fact, many of the issues that hotends or nozzles get blamed for can actually be traced b...

Mounts directly to the top of The Mosquito Hotend™/Mosquito Magnum™ heat sink Simple to install and configure Machined aluminum component Inc...

Replacement heat break insulator for the Mosquito Magnum™ hotend Composite construction Insulates Mosquito Magnum™ heat break to help extend ...

Hardware for mounting the hot block to the heat sink in the Mosquito or Mosquito Magnum hotends. Thin walled stand-off tubes reduce conductive he...

High quality 25 mm box fan with dual Japanese bearings 3.64 CFM Genuine Molex Micro-Fit 3.0 connector Mounts directly to the standard Mosqu...

Mounting hardware for all Slice Engineering® hotend variants. Includes: Set (2x) of M2.5x10 socket head cap screws and washers for attaching Mosq...

MORE THAN A HOTEND, A NEW MODALITY Mosquito® Magnum+™ Includes all of the industry-leading benefits of the Mosquito® product line, such as Bimetall...

Need to replace your heat break? We’ve got you covered, with the Bimetallic Heat Break™ from Slice Engineering. Composite, bi-metallic constructio...

Aircraft grade aluminum heat sink Fits Mosquito™ or Mosquito™ Magnum Mounting point for 25 mm cooling fan Contains built in anti-rotation f...

Replacement hot block for the standard Mosquito™ and Mosquito Magnum™ hotend variants High-grade copper construction Plastic-repellent coatin...

The Mosquito™ Magnum prints upwards of 40 mm^3/sec A thermal insulator protects the extended melt zone from the effects of active cooling and...

Standard Pack - 0.2 / 0.3 / 0.4 / 0.5 / 0.6 mm nozzlesSupersized Pack - 0.8 / 1.0 / 1.2 / 1.4 / 1.8 mm nozzles Multiple variations available Forgo...

Got a sticky nozzle? Sick of plastic sticking to it all the time? Plastic Repellent Paint™ by Slice Engineering® is the solution for you! Plastic ...

Compatible with all Slice nozzles. E3D and Bondtech nozzles and can be tightened with an adapter and socket. Specifically designed for changing no...

Eliminates the need for high temperature RTD's or having two separate thermistors to maintain accuracy at both the low and high end of the temper...